PRI 2018: How Performance Friction Puts The Brakes On IndyCar

Engineers James Borner and Paul Rankin guided us through how Performance Friction optimized the brake package for one of the most grueling categories in motorsport. Performance Friction started bu supplying pads and rotors to IndyCar teams in 2017 stepped in 2017 then for 2018 engineered a unique new caliper specifically for the class.

The unique continuous single-weave carbon matrix setup was developed to address the reduction in downforce due to the simplified aerokits first run this year. In other words, the drivers would spend more time braking, top speeds would be higher, and PFC had to maximize the existing brakes within the parameters already established. Simply put, dissipating heat in an IndyCar is a tall order, but their shrewdness and comprehensive understanding of the sport and all its demands enabled them to conquer the challenge.

Heat is the Enemy

They established their priorities early in the process. “Heat is the biggest issue on the hardest tracks; you have to design to be able to handle what St. Petersburg is going to throw at you,” says Borner. “We also had to come up with a rotor which wouldn’t lose its float throughout the race.” To do this, they they utilized PFC’s V3 attachment system to fasten the disk to the hat which can accommodate growth in both axises.

The titanium bobbin-based V3 attachment system not only allows the rotor to float freely but as the titanium resists heat transfer to the aluminum hat

The innovative design does away with the usual nuts and bolts. Fifteen titanium bobbins isolate the heat from going into the aluminum hat and allow for axial and radial growth, because the bobbins are not constraining the disc from growing when they heat. This allows for full float, and yet the vital components are separated—the hat and the disc may only be separated by one millimeter, but there can be a difference of as much as 800°C between the two.

The new discs weight 4 pounds a piece–compare that to a 20 pound steel disc of a comparable size.

Carbon is thermally stable and doesn’t expand much under heat. “The disc and pad are the same material, essentially” Rankin adds. The biggest issue, brake-wise, in IndyCar is longevity. The teams want to avoid replacing the friction material and discs every race, and this heat dissipation means these brakes can last several races.

All-Purpose Pads and Rotors

This also makes them versatile. Regardless of the style of course—street track or speedway—the teams want to run the same brakes, basically. The teams will install full-depth rotors and pads at a course that’s tough on brakes, like St. Petersburg, and then reuse the now thinner and lighter rotor and pads on a superspeedway where braking force isn’t as much of an issue as reducing weight.

In addition, the PFC engineers improved cold air ducting ducting around the confines of the basic package; they still needed to remain within the wheel clearance. Glove ducting, which directs air beyond the pack of the pad and into the throat of the caliper (by the pistons, where most of the heat is generated) which helps drop 100°C from the former as a result of this configuration.

These were just some of the examples of their detail-oriented approach to maximizing braking power. With this insistence on maximizing every aspect of the braking system, it’s no wonder these brakes have become so prevalent in Porsche GT racing and full-bodied racers, and have become massively popular among track day regulars who need a seek the highest levels of performance  and confidence in their binders.

About the author

Tommy Parry

Tommy Parry has been racing and writing about racing cars for the past seven years. As an automotive enthusiast from a young age, he worked jobs revolving around cars throughout high school, and tried his hand on the race track on his 20th birthday. After winning his first outdoor kart race, Tommy began working as an apprentice mechanic to amateur racers in the Bay Area to sharpen his mechanical understanding. He has worked as a track day instructor and automotive writer since 2012, and continues to race karts, formula cars, sedans, and rally cars in the San Francisco region.
Read My Articles

Late Model LS Power in your inbox.

Build your own custom newsletter with the content you love from LSX Magazine, directly to your inbox, absolutely FREE!

Free WordPress Themes
LSX Magazine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

We'll send you the most interesting LSX Magazine articles, news, car features, and videos every week.

LSX Magazine - The Late Model GM Magazine for Camaro

LSX Magazine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


chevyhardcore
Classic Chevy Magazine
dragzine
Drag Racing
enginelabs
Engine Tech

LSX Magazine - The Late Model GM Magazine for Camaro

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • chevyhardcore Classic Chevy Magazine
  • dragzine Drag Racing
  • enginelabs Engine Tech

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

Thank you for your subscription.

Thank you for your subscription.

LSX Magazine - The Late Model GM Magazine for Camaro

Thank you for your subscription.

Thank you for your subscription.

Loading