We believe in the magic of the automobile
IMG_7799

MSD Performance’s Atomic LS Electronic Fuel Injection system makes quick work of installing a programmable engine management system on any LS-powered machine. Check out the details of its operation inside!

Read More »


Chip Foose

The history of Lincoln Electric and Arc Welding in all forms is rooted and tied directly to advancements in automotive technology. We dive deep to uncover the history past, present, and future. Check it out here!

Read More »


01

We’re going after big numbers to help our new 1978 Malibu wagon project car “Fugly” get down the quarter-mile in the 9-second range. So thus begins the build of our 1,000+ horsepower, Whipple supercharged behemoth

Read More »


IMG_5050

We started with a GM crate engine and did a complete top-end upgrade. We installed parts from COMP Cams, RHS, Edelbrock and Performance Distributors. Then we decided to build a stroker – find out why inside.

Read More »


JE_Set1_LS_1_Combo

JE Pistons has expanded its asymmetrical technology to the LS line of pistons. This design features a smaller piston skirt on one side to reduce weight and friction without giving up durability. Check out the story!

Read More »


Mantic-1

The Camaro 1LE was built for the track right off of the showroom floor, but that doesn’t mean that you can’t improve upon it’s track prowess. Follow along as we install a Mantic dual disc clutch…

Read More »


e-street21

Edelbrock’s new E-Street EFI is a self-learning fuel injection system that can take away all of your carburetor woes and replace them with reliability, drivability, and better fuel economy – even on this ’67 ‘Vette.

Read More »


CraneCams_LS6

In this tech installment, we take an in-depth look at dyno tests of three of Crane Cam’s most popular LS3 grinds. Step inside to get the real-world data on how each different cam affects the LS3′s power production.

Read More »


Eaton 16

It’s not everyday that you get the chance to experience a tour of OE level proving grounds and R&D, so when we had the opportunity to tour the Eaton facility we jumped on it! Check out how Eaton puts their superchar

Read More »


IMG_1357

Camshaft technology has been around for centuries. This month we dive deeper into the history and substance of the camshaft and its uses in the internal combustion engine. Check it out here!

Read More »


MAM-4

When we went looking for a cat-back exhaust for our 1997 Corvette, we were blown away by the choices that were out there! The options seem limitless, but for a Corvette, we decided to give a call to the guys who are among the best for Corvettes in the industry – Mid America Motorworks!

Read More »


IMG_9820

Doug’s Headers builds premium exhaust components for the C3 Corvette and many other applications. Take a look inside at a side-mount header and exhaust installation on a 427 Tri-Powered ’69 convertible!

Read More »


Injector Experts 075

Most fuel injectors can be serviced and brought back to health relatively inexpensively when they decide to misbehave – Injector Experts can clean most of the common types for just $20 a pop, check it out here.

Read More »


IMG_8815

Designed specifically to clear tall valve gear like Jesel’s shaft-mount rocker arms without the use of a spacer, these billet aluminum covers are available with rocker oilers (Part number VC-0081), or without (Part number VC-0081X) like ours.

Read More »


IMG_8491

The dynamometer is the handiest tool in your toolbox – it can assist you in diagnosing many issues along with providing the real-world horsepower and torque figures your car puts to the ground. Check it out here!

Read More »


IMG_3366

An inline electric fuel pump was needed for our FAST EZ-EFI system, but FAST went one better with their Universal In-Tank Electric Fuel Pump kit, and we installed it in about a day. It’s now quieter, more efficient, and will last a little longer than the pump it replaced.

Read More »


IMG_6278

Today, we’re going to take a closer look at the design and advantages of Derale’s Hyper-Cool Remote transmission cooler unit and show you why it’s remote mounting and stacked plate design are perfect for our racing application. We’ll also give you a brief walk-through of the installation process.

Read More »


Valves_3

While cylinder head porting receives most of the attention, valve design is also important. After all, there’s no greater restriction in performance intake systems than the traditional poppet valve. Check it out.

Read More »


LS12Rot

The 12-cylinder LS engine dubbed the “LS12″ has been creating quite a stir in the LS world. We spoke with one of the builders of the amazing Frankenstein V12 LS engine and have all the inside info on this incredible engine build inside. Click the link for all the info…

Read More »


Subscribe

Get the most up to date news & articles directly in your inbox from CorvetteOnline!

We will never share your email address


br10

Chris Alston’s Chassisworks hand-selects the Wilwood components that are part of its brake kits in order ensure delivery of optimum performance with its suspension kit and subframe that we chose for the Chevy Hardcore.com ’69 Camaro Blank Slate Project Car Build Up.

Read More »