Moroso’s DS-2 17-inch front runners cater to late model muscle and performance car owners who need to run a larger size front drag wheel to clear their bigger factory brakes and want a high-tech tire for the track.
by Josh Kirsh on December 4, 2013
Everything you wanted to know about clutches, and maybe some things you didn’t know you needed to know. Check out this detailed question-and-answer session with some of the industry’s top minds!
by Jake Headlee on October 29, 2013
Four digit horsepower to the tires on pump gas? You better believe it…
The Cloyes Hex-A-Just true roller timing chain set allows finite cam adjustment after installation, up to six degrees in either direction (advanced or retarded). We install one and show how it works.
Taking on the task of wiring a vehicle can be daunting, but the experts at Ron Francis Wiring can help. Here, they’ve outlined ten popular tips and guidelines for managing your own wiring systems.
by Bobby Kimbrough on October 14, 2013
Crate engines from Pace Performance are built by professional engine builders with aftermarket parts from companies that are known for quality and consistency. Check out these crate options here!
by Barry Kluczyk on October 9, 2013
Seventy-five years after it opened, GM’s historic Tonawanda engine plant heads into the future with production of the Gen V family. We follow along with the build of Chevy’s newest small-block, the LT1.
There’s no denying the benefits of self-tuning EFI on a street car, but what about a drag racer? Follow this installation of a FAST EZ-EFI 2.0 system on a hot little Nova and check out the dyno numbers.
by Jason Reiss on September 20, 2013
MSD Performance’s Atomic LS Electronic Fuel Injection system makes quick work of installing a programmable engine management system on any LS-powered machine. Check out the details of its operation inside!
by Bobby Kimbrough on September 19, 2013
The history of Lincoln Electric and Arc Welding in all forms is rooted and tied directly to advancements in automotive technology. We dive deep to uncover the history past, present, and future. Check it out here!
by Barry Kluczyk on September 17, 2013
We’re going after big numbers to help our new 1978 Malibu wagon project car “Fugly” get down the quarter-mile in the 9-second range. So thus begins the build of our 1,000+ horsepower, Whipple supercharged behemoth
by Michael Harding on September 17, 2013
We started with a GM crate engine and did a complete top-end upgrade. We installed parts from COMP Cams, RHS, Edelbrock and Performance Distributors. Then we decided to build a stroker – find out why inside.
by John Baechtel on September 16, 2013
JE Pistons has expanded its asymmetrical technology to the LS line of pistons. This design features a smaller piston skirt on one side to reduce weight and friction without giving up durability. Check out the story!
by Rick Seitz on September 13, 2013
The Camaro 1LE was built for the track right off of the showroom floor, but that doesn’t mean that you can’t improve upon it’s track prowess. Follow along as we install a Mantic dual disc clutch…
by Michael Harding on September 9, 2013
Edelbrock’s new E-Street EFI is a self-learning fuel injection system that can take away all of your carburetor woes and replace them with reliability, drivability, and better fuel economy – even on this ’67 ‘Vette.
by Clifton Klaverweiden on August 22, 2013
In this tech installment, we take an in-depth look at dyno tests of three of Crane Cam’s most popular LS3 grinds. Step inside to get the real-world data on how each different cam affects the LS3′s power production.
by Barry Kluczyk on August 15, 2013
It’s not everyday that you get the chance to experience a tour of OE level proving grounds and R&D, so when we had the opportunity to tour the Eaton facility we jumped on it! Check out how Eaton puts their superchar
by Bobby Kimbrough on August 15, 2013
Camshaft technology has been around for centuries. This month we dive deeper into the history and substance of the camshaft and its uses in the internal combustion engine. Check it out here!
When we went looking for a cat-back exhaust for our 1997 Corvette, we were blown away by the choices that were out there! The options seem limitless, but for a Corvette, we decided to give a call to the guys who are among the best for Corvettes in the industry – Mid America Motorworks!
Get the most up to date news & articles directly in your inbox from CorvetteOnline!
We will never share your email address
by Jason Reiss on July 26, 2013
Doug’s Headers builds premium exhaust components for the C3 Corvette and many other applications. Take a look inside at a side-mount header and exhaust installation on a 427 Tri-Powered ’69 convertible!